rohs compliant pmz2035 ? rc unit, class x 1, metallized paper with integrated resistor ? 0.1 f 150 ? , 440 vac, +85 c l h b p 0.5 l ? 1.0 (tinned) c r l: standard: 30 +5/-0 mm option 1: short leads, tolerance +0/-1 mm (standard 6 mm, code r06) other lead lengths on request option 2: 30 mm insulated solid leads, ordering code: replace r30 with r300ps in std p/n 440 vac, 50/60 hz 0.1 f 20% 150 ? 30% 1000 v C40 to +85c 40/085/56/b enec the series resistance is defned at 100 khz 6000 m? measured at 500 vdc after 60 s, +23c max 12 a repetitive. max 20 a peak for occasional transients. the 100% screening factory test is carried out at 1800 vdc. the voltage level is selected to meet the requirements in applicable equipment standards. all electrical characteristics are checked after the test. recommended voltage 1000 vdc. the average losses may reach 0.5 w provided the surface temperature does not exceed + 85c. for maximum permitted power dissipation vs temperature, see derating curve. typical applic ations construction technical data rc unit for use in dc and ac applications for: C contact protection C interference suppression of contacts C transient suppression multilayer metallized paper, encapsulated and impregnated in self-extinguishing material meeting the requirements of ul 94v - 0. the resistance in the metal layer is utilized as series resistance, integrated resistor. rated voltage capacitance range capacitance tolerance resistance range resistance tolerance peak pulse voltage t emperature range climatic category a pprovals s eries resistance i nsulation resistance pulse current t est voltage between terminals in dc applications power ratings ? rc unit for safety applications. ? small dimensions ? high du/dt capability. ? self-extinguishing encapsulation. the material is recognized acc. to ul 94 v-0 ? good resistance to ionisation due to impregnated dielectric. ? excellent self-healing properties. ensures long life even when subjected to frequent overvoltages. ? the impregnated paper ensures excellent stability giving outstanding reliability properties, especially in applications having continuous operation. 40 t amb 50 60 70 80 85 c 0.5 p max w 0 maximum allowable power dissipation vs ambient temperature statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applic ations, but are not intended to constitute and we specifically disclaim any warranty concerning suitabi lity for a specific customer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice in ferred from this inform ation or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the ad vice given or results obtained.
1 evox rifa leaded film capacitors pmz2035 ordering infor mation marking ? rifa ? rifa article code ? rc unit ? rated capacitance and resistance ? rated voltage ? capacitor class and sub-class ? sh, for self-healing ? climatic category according to iec 60068-1, appendix a ? passive fammability class ? approval marks ? manufacturing code (year, month) approv als certifcation body specifcation enec en/iec 60384-14:2005 quantity per package capaci- resis- max dimensions in mm reel w eight article code tance tance r30 r06 taped f ? b h l p pcs pcs pcs g ar ticle table 0.10 150 12.1 19.0 30.5 25.4 100 800 10 PMZ2035RE6100K150R30 environme ntal te st data v ibration iec 60068-2-6 3 directions at 2 hour each no visible damage test fc 10 C 500 hz at 0.75 mm no open or short circuit or 98 m/s 2 bump iec 60068-2-29 4000 bumps at 390 m/s 2 no visible damage test eb no open or short circuit solderability iec 60068-2-20 solder globule method wetting time test ta for d > 0.8 < 1.5 s active en/iec 60384-14:2005 fammability passive en/iec 60384-14:2005 fammability ul 1414 enclosure material of ul 94v-0 fammability class humidity iec 60068-2-3 +40c and 90 C 95% r.h. 56 days test ca the article code for the standard part is given in the article table. for other options, see page 11. statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applic ations, but are not intended to constitute and we specifically disclaim any warranty concerning suitabi lity for a specific customer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice in ferred from this inform ation or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the ad vice given or results obtained.
|
